SM- BLOCK-Plus BLOCK AND GUIDE
$ 69.95 0.9Lb
SM-SAW Convenient fine tooth saw , works great with SM-BLOCK
$ $ 9.95 0.5 lbs
SM Inspection light $11.95 .05Lb
Convenient Cutting block and saw guide
The 4 .25 x 1.5 inches
Hand held Saw Guide, straddles the sound post and helps accurate cut
when using fine tooth saw.
Model VSP-Block and VSP-Guide
SOUND POST CUTTING BLOCK
Works best when used with VSP Sound Post Gauge
Sound post marking line is engraved at block face.Best procedure is to add about 3.5" of 1" masking tape across the length of cutting
block, then a line is drawn to show where the sound post should be placed, which is the line running exactly through the middle of
the sound post mounting line.
Two points indicating length of sound post are drawn. Finally lines showing measured angles are
drawn to show where saw guide must be positioned
Two pins when matched to holes drilled in the work table
allow firm position of cutting block.
The pins can be removed if cutting
block is held on flat surface.
violin tools from violin4u
SM-BLOCK-Standard or Plus Cutting Block and guide
SM-BLOCK-Standard Block and guide
$ 19.93 0.5L
SM-BLOCK-Standard is recommended for violin owners and teachers. the tool is made from aluminum, can be used occasionally many...
many times over.
For luthiers, who may need to cut sound posts on daily basis we recommend SM-BLOCK-Plus, whch is made of non magnetic
Standard Spruce Sound Post Blank
Nominal aprox 6mm $ 0.80
Selected Spruce Sound Post Blank
High grain density >30 gpi $ 3.99